Foxconn IGPSK7MA-ERS - Manual (Page 56)

Chapter 5 nVIDIA RAID Introduction
49
To designate a free disk to be used as a RAID array disk,
1. Tab to the Free Disks section. The first disk in the list is selected.
2. Move it from the Free Disks block to the Array Disks block by pressing the right
arrow key ( ). The first disk in the list is moved, and the next disk in the list is
selected and ready to be moved.
3. Continue pressing the right-arrow key ( ) until all the disks that you want to
use as RAID array disks appear in the Array Disks block.
Completing the RAID BIOS Setup
1. After assigning your RAID array disks, press . The Clear disk data prompt
appears.
It shows that two disks have been assigned as RAID1 array disks in the figure
above.
ＩＧＰＳＫ７ＭＡ－ｍａｎｕａｌ－Ｖ１．０－１１－１３－０４．ｐ６５ 2004-11-15, 17:36 49