Foxconn IGPSK7MA-ERS - Manual (Page 53)

Chapter 5 nVIDIA RAID Introduction
46
Setting Up the BIOS
1. Start up the computer, then press to enter the BIOS setup. Use the
arrow keys to select Integrated Peripherals, then press .
2. Use the arrow keys to highlight the RAID Config, then press .
3. From the RAID Config window, enable the IDE RAID, the other items would be
activated, then you can enable the disks that you want to use as RAID disks.
Note: Make sure to enable the SATA drives if you are setting up a RAID 0+1
array.
4. Press to save the configuration and exit.
ＩＧＰＳＫ７ＭＡ－ｍａｎｕａｌ－Ｖ１．０－１１－１３－０４．ｐ６５ 2004-11-15, 17:36 46