Formax 7100 Series - Manual (Page 30)

29
5.8 Barcode reading
If ‘Mark read’ was set to Barcode when editing a document or insert, the following screen
will appear when all other settings have been made.
Note: Barcode definitions can only be created by authorised personnel.
explanation of settings
BCR definition
This is the name of the setup that defines the function of each of the marks. It
can only be created by authorised personnel and must already exist in order to
be used. Up to 9 definitions can be created.
read head Id
This stipulates the location of the read head on the machine, ie. which hopper
and whether LH or RH side.
divert oversize group
Diverts groups that are larger than setting of ‘Default Max. Folds’, set in Supervi-
sor. Defaults are 5 for C, Z or V fold, 4 for Double V fold.
Good decode reads
Set the number of consecutive good reads required before the label is acepted.
Set to low number is print quality is poor.
When all character positions have been defined, select ‘Done’ to return to the edit screen.
