Formax 7100 Series - Manual (Page 13)

12
5 OPeraTING THe MaCHINe
5.1 Operating overview
Shown below is a brief summary of the operating procedure of the machine. Full details
of the functions referred to can be found in the section numbers indicated.
1. Load document and/or insert hoppers (page 33).
2. Load envelope hopper (page 34).
3. To run a pre-programmed job, see page 15.
4. To quickly set up a one-off program using Select & Go, see page 14.
5. To fully program a new job, see page 21, or to modify an existing job,
see page 16.
Other functions
Further additional features include:
i) Daily post (to fold and insert documents or groups of docu-
ments which may vary in size or type) - see page 32.
Menu explanations
There are a number of screens on the machine, showing either menus or lists.
These are described in on the pages shown below:
Main menu see page 13
Select & Go screen see page 14
Run screen see page 15
Create Job menu see page 21
Save screen see page 26
OMR menu see page 27
Barcode menu see page 29
Supervisor menu see page 30