beautypg.com

Vi. system start-up, Vii. calibration – Floscan Series 9700/97000 Standard Flow GPS Interface System (twin engine model) User Manual

Page 5

background image


5/14/2007

4001-386-00I

FloScan Instrument Company, Inc.

Tel: (206) 524-6625

Fax: (206) 523-4961

3016 NE Blakeley Street, Seattle, WA 98105

Email: [email protected]

Http://www.floscan.com

VI. System Start-Up:


Start and run your engines. Look for leaks and other installation problems. If system is not operating properly refer to the
Troubleshooting Instructions and correct any deficiencies.

VII. Calibration:


When system is running properly, refer to the calibration instructions and calibrate your system. If installed properly, initial
calibration takes less than 1 hour. After consuming some fuel, final calibration should only take a few minutes.

The US Code of Federal Regulations, (CFR’s) contain no requirement for using Type A-1, A-2, B-1 or B-2, USCG
approved fuel hose on diesel powered pleasure vessels. To meet ABYC standards though, fuel hose shall comply with the
requirements of UL 1114, Marine (USCG Type A) Flexible Fuel-Line Hose, or SAE J1527, Marine Fuel Hoses, (ABYC H-
33.6.1).

USCG approved fuel hose with either fabric or wire reinforcing braid meet the following standards:

Hose Marking Permeation

Rating

2½ Minute Fire Test

USCG Type A-1

100g/m²/24hrs.

Required

USCG Type A-2

300g/m²/24hrs.

Required

USCG Type B-1

100g/m²/24hrs.

Not Required

USCG Type B-2

300g/m²/24hrs.

Not Required

Table I

Cost comparison between steel & fabric braid A-1 fuel hose on a 50’ Diesel pleasure vessel with, “Stand-up” engine room,

Aeroquip A-1 Steel Braid

Hose with JIC x MNPT

Fittings

A-1 Fabric Braid Hose

with

HB x MNPT Fittings

48’, ¾” Hose / Engine x 2 =

96’

$9.73 / Ft x 96’= $934.08

$5.00/Ft x 96’= $480

Hose End Fittings, 28 Ends.

$11.50 per End, x 28 = $322

N/A

Hose End Assembly Fee

$10 / Hose x 14 = $140

N/A

Stainless Hose Clamps

N/A

28ea x $1.49 = 41.72

Fittings 16 x 12

4ea x $13.80 = $55.20

4ea x $5.39 = $21.56

Fittings 12 x 12

20ea x $11.90 = $238

20ea x $4.20 = $84

Fittings 8 x 12

4ea x $10.75 = $43

4ea x $3.59 = $14.36

Totals: $1732.28

$641.64

Table II

This manual is related to the following products: