Fire Magic Aurora Built-In Combo Grill A830i - Manual (Page 29)

29
CONVERTING THE GAS TYPE (cont.)
CHANGING THE CHARCOAL BURNER ORIFICE
1. Remove the two cooking grids from above the
charcoal burner.
2. Remove the charcoal screen and charcoal tray (see
Fig. 29-3).
3. Remove the burner clip that is located on the inner left
most wall. It is located toward the bottom, directly to
the left of the charcoal burner (see Fig. 29-3 & 29-4).
Use a fl athead screwdriver to assist in removal.
4. To unsecure the burner; slightly lift the left side
upward, shift the entire burner to the right, then rotate
clockwise until the burner clears the orifi ce (see Fig.
29-5). To remove the free burner; lift the right side
upward until it clears the grill interior, then completely
lift out the burner (see Fig. 29-6).
5. Use a 3/8" hex nut driver to remove the exposed
orifi ce and replace it with the correct orifi ce for the
gas being converted to (see Table 1 for size).
6. Replace the burner, burner clip, charcoal tray,
charcoal screen, and cooking grids.
Burner clip
(under lip)
Fig. 29-3
Charcoal burner
Burner clip
Fig. 29-4
Charcoal burner
Left most wall
Fig. 29-5
Orifi ce
Fig. 29-6
Screen &
charcoal tray
removed
B
B
A
C