ETA Bolero - Manual (Page 65)

ENG - 65
ENG
ENG - 65
the cleaner back off continuously
1) Avoid use in sunlight or dark color carpet.
2) Pat the front bumper.
the cleaner dropped from the stair
• Clean the ground detection sensors at the front bottom of the cleaner.
the cleaner can not auto-charging after didn’t use in a long time
• Use the adaptor to full charged first
the cleaner stop to work, but no error code display
• Don’t disassemble and maintain it by yourself, contact the after sale service maintenance
10. faIlUre InformatIon WhIch may appear DUrInG UsInG:
failure
code
reason solution
Er01
Right side sweep
motor‘s current overflow.
Check the Right side brush and remove the wrapped
hair or garbage.
Er02
Sweep motor‘s current
overflow.
Check the main brush and remove the wrapped hair or
garbage.
Er03
Left side sweep motor‘s
current overflow.
Check the Left side brush and remove the wrapped hair
or garbage.
Er04
Left walk motor‘s current
overflow.
Check left wheel,may change the left wheel when it is
necessary.
Er05
Right walk motor‘s
current overflow.
Check Right wheel,may change the left wheel when it is
necessary.
Er07 Walk motor is pick up. Arrange the wheels well.
Er09 Dustbin is absent. Fix the dustbin well.
Er10
Thermal resistor‘s
connection is not well
Check the connector chip
provided that the failure still exist after the above check, please contact the after-sale
service maintenance, professional maintenance staff or the technical center
of the company, don’t disassemble and maintain it by yourself.
The error code will be show once time when the robot is working and it will show again until
re-turn on the swith.