ETA Bolero - Manual (Page 61)

ENG - 61
ENG
Speed
selection
Press the “ ” key repeatedly, you can choose fast or slow speed.
It will have automatic memory after the speed selection (fast 2, slow 1).
Turn on /off/
cancel/stop
1) Turn on the power switch of the cleaner, and press the key can turn on/off
the Cleaner.
2) You can stop the running mode by pressing the key .
3) You can delete and return to the original setting if you get wrong sets or
want to stop setting.
key 1) You must press “OK” to save any setting you did
Auto Docking
Key
While the Cleaner is in the Standby mode or running, the Cleaner will search
the Docking Station for charging after you press “ ” key.
▲ Forwar key Press “ ▲ ”, the Cleaner will run forward cleaning press “
” can stop.
It will stop automatically in case of the obstacle.
▼ Backward
key
Press “ ▼ “ for long, the Robot will run backward cleaning, and it will stop
after you release the key.
◄ Turn left
key
Press “ ◄ ” and release till the Cleaner turn left to the direction you want.
It will stop automatically in case of the obstacle.
► Turn right
key
Press “ ► ” and release till the Cleaner turn right to the direction you want.
It will stop automatically in case of the obstacle.
1) You should use the remote control within 10 m (radio signal scope), or you may fail to
control the main body.
2) The Cleaner may fail to find the Docking Station due to the obstacle, complex condition
or because the battery’ power used up.
7. aUto charGInG DockInG statIon
7.1 DescrIptIon of the DockInG statIon
overall Display function Instructions
1) LED decorative light
(a little essence can be placed above)
2) Decorative light switch
3) Power LED
4) Charging indicator
5) Signal transmitting
6) Charging positive electrode
7) Charging negative electrode
8) Charging power DC socket