DR Power 3-Point Hitch Top-Discharge - Manual (Page 16)

16
TO FREE A JAMMED FLYWHEEL
• Stop the tractor engine and disengage the P.T.O. shaft.
• Wait for all moving parts to come to a complete stop.
• Disconnect the P.T.O. shaft from the tractor.
• Remove any material left in the chipper hopper.
• Remove the discharge chute.
NOTE: Never pry against the scroll weldment when removing the deflector or at
any other time. This will cause damage to the machine.
• Check to see if discharge chute is clogged. If it is, clear with a branch.
• With a wooden stick, loosen and remove any material left in the chipping chamber.
• Reinstall the discharge chute.
• Reconnect the P.T.O. shaft.
• Start machine and let material in chipping chamber discharge through deflector.
• If chamber doesn’t clear and the flywheel is still jammed, repeat above process.
• Be certain chipping chamber is clear before trying to process more material into the
chipper.