DNF Controls USP-RDC - Manual (Page 11)

Page 11 of 13
Remote Follow GTP/DC – Tally Event Labels from GTP/DC
Extended Follow GTP/DC- Tally Extended Tally(ET) Event Labels from GTP/DC
Tally is ON when any of the assigned Event Labels is ON
The associated Event Label’s text and color entry is used
Tally is OFF when assigned Event Label is ON or all assigned Event Labels
are OFF
Follow GTP/DC User Register- Tally User Registers and their values from GTP/DC
Tally Main Err: Text and color displayed when Main remote device (Main Backup Pair) or
assigned remote device (not Main Backup Pair) goes offline
Backup Err: Color displayed when Backup remote device (Main Backup Pair) goes offline
Mismatch Err: For Main Backup Pair only. Color displayed when Main and Backup tally do
not match
OFF: (ET only) Text and color displayed when assigned OFF Event Label is received or all
assigned Event Labels are OFF
ET1, ET2, ET3, ET4: Text and color displayed when assigned Event Label is received
Tally Color Dark
Red
Green
Amber
Flashing Red
Blinking Red
Flashing Green
Blinking Green
Flashing Amber
Blinking Amber
Font Size Big: 1 row of 3 characters
Normal: 2 rows of 4 characters each
Small: 3 rows of 6 characters each
Event Label Manually enter, or cut & paste, the Event Label from the GTP-32’s or DC20’s Event
Notification Table. The event label is case sensitive, may not contain spaces, and must
exactly match the Event Notification Table entry. (Refer to the GTP-32 or DC20 User
Manual.)
Value For Follow GTP/DC User Register only. Enter User Register value to match.
NOTE- Redundant Mode of operation is enabled at powerup.
Use a USP key to turn Redundant Mode On/Off.