DNF Controls ST304-DSR1K-HL - Manual (Page 25)

ST304-DSR1K, Slow Motion Controller 2 2 1 1 o o f f 2 2 7 7
9. FUNCTION TABLE
Function Key Press Description
EE On/Off [EE] Toggle EE mode on/off. Status indicator is on
when EE is on.
SEARCH TO
ENTERED
TIME
[SHIFT] + [RECUE] To enter a GOTO location without altering the
contents of the Cue Point, enter the desired
timecode number using the numeric keypad.
Press [GOTO] to search to the entered time.
Press [ESC] to exit without searching.
DSR START
RECORD
[SHIFT] + [RECORD] Press [SHIFT] + [RECORD] to start recording
on selected record channel.
DSR STOP
RECORD
[SHIFT] + [STOP] Press [SHIFT] + [STOP] to stop recording on
the selected record channel.
FFWD [FFWD] Press and HOLD to FFWD. Release key to stop.
Set WIND Speed in MENU.
GOTO CUE [GOTO] LOAD current cue or Search the VTR to the IN
Point of the currently displayed Cue Point.
GANG [SHIFT] + [VTR#1]
OR
[SHIFT] + [VTR#2]
Individually press the VTR keys to be included in
the gang; the LED above the key will turn on.
Press the VTR key again to remove from gang;
the LED above the key will turn off. Press [ESC]
to exit.
The VTR LEDs that are on show the gang.
The flashing LED shows which VTR is currently
selected.
JOG [JOG] Select JOG mode and enable the Wheel.
LAST CUE [LAST CUE] Step to the previous Cue Point Location.
NEXT CUE [NEXT CUE] Step to the next Cue Point Location.
REVERSE
PLAY
[LIST] For T-BAR ONLY – HOLD key to play video in
reverse. RELEASE key to play forward.
REWIND [RWD] Press and HOLD to rewind. Release key to stop.
Set WIND Speed in MENU.
SHUTTLE [SHUTTLE] Select SHUTTLE mode and enable the Wheel.
SLOMO [SLOMO] Press SLOMO to slo-mo the VTR. Turn the Wheel
or move the T-Bar to change the play speed.
Press SLOMO to STILL frame OR press any
transport key to exit.