DNF Controls DMAT-O-42 - Manual (Page 20)

Page 18 of 23 DMAT-O-42 Sports Controller, Odetics Protocol
Reference
XV. SETUP MENU
Press [MENU]. The MENU indicator will turn on.
Turn wheel to select menu item.
Press the {CHANGE} softkey to open the choices for that item.
Press {BACK} softkey to save change and return to menu.
Press the {EXIT} softkey to exit the Setup Menu.
FUNCTION DESCRIPTION
{CLEAR} Select Item to Clear
{CLR CLIPS}
Delete all clips from 1000 to 1399, 2000 to 2399, 3000 to 3399, and 4000
to 4399.
{CLR LISTS}
Delete all Playlists, (00 19),
{CLR MEMORY}
Clear all non-volatile memory including clips and Playlists.
{DEFAULTS} {SET DEFAULTS}
Set Setup Menu parameters to factory programmed defaults.
P1 ACCESS Select {ENABLE} or {DISABLE} softkey to enable or disable control of
P1.
P2 ACCESS Select {ENABLE} or {DISABLE} softkey to enable ot disable control of
P2.
TIME CODE
SUPPORT
Set for each playback channel.
Select TIMECODE {Supported} or {NOT Supported}.
For Profile XP, PDR select NOT supported.
For other video servers select Supported
RECORD KEY
SETUP
Select {Load Only} or {Load and Cue}.
If {Load Only} is selected, every time REC key is pressed, the Master REC
clip will be loaded and parked at the tope of the clip.
If {Load and Cue} is selected, the REC clip will be loaded, cued to current
record time minus input video delay and put into PLAY.