DNF Controls DMAT-O-42 - Manual (Page 13)

DMAT-O-42 Sports Controller, Odetics Protocol Page 11 of 23
VIII. SAVE CLIP
A. Press [IN] to mark an IN point.
B. Press [OUT] to mark an OUT point.
C. Press [SAVE CLIP] to save the IN and OUT points in the next available
clip number in the number range corresponding to the playback channel’s
current selected input.
OR
Manually enter clip number using the numeric keypad, then press [SAVE
CLIP] to save the IN and OUT points into the manually entered clip
number.
The IN point HH:MM:SS is assigned as the default Clip Label.
D. Press [DEL] + [IN] to delete the In point, in PB mode.
E. Press [DEL] + [OUT] to delete the Out point, in PB mode.
If clip is saved in EE mode, the current LTC (Time-of-Day) is used as
it’s IN/OUT points. If there is gang established when saving clips, all
channels that are part of Gang Record will save clips.
If clips are saved in PB mode, the current Playback Time is used as
IN/OUT point. If there is gang, both P1 and P2 save the clips.
IX. RECALL CLIP
A. Press [NEXT] to highlight the next clip in the clip list portion of the
display.
B. Press [LAST] to highlight the previous clip in the clip list portion of the
display.
C. Press [RECALL CLIP] to recall the selected clip.
OR
Manually enter a clip number using the numeric keypad, then press
[RECALL CLIP] to recall the manually entered clip number.
If a 3-digit number is entered, the clip number in the range corresponding
to the playback channel’s currently selected input will be recalled.