DNF Controls DMAT-O-42 - Manual (Page 11)

DMAT-O-42 Sports Controller, Odetics Protocol Page 9 of 23
V. INPUT SELECTION
Select the Input (Master Record Clip) to view in EE and PB modes on the
current playback channel. Refer to Section 4, MASTER RECORD CLIP
ASSIGNMENT. This selection may be changed at any time. This selection may
be changed many times during a production.
Press [P1] or [P2] to select the playback channel.
Press {CAM1} to select its assigned Master Record Clip.
Press {CAM2} to select its assigned Master Record Clip.
Press {CAM3} to select its assigned Master Record Clip.
Or
Press {CAM4} to select its assigned Master Record Clip.
This input assignment will determine the clip number range used when saving
and recalling clips on this playback channel.
For example:
Assign CAM3 to playback channel 1.
Mark an In point and Out point, then press the Save Clip key.
The In and Out point will be saved in the next available clip in the
number range 3001 to 3399.
Assign CAM4 to playback channel 2.
Mark an In point and Out point, then press the Save Clip key.
The In and Out point will be saved in the next available clip in the
number range 4001 to 4399.