DNF Controls DMAT-O-22 - Manual (Page 20)

Page 16 of 21 DMAT-O-22 Sports Controller, Odetics Protocol
Reference
XVI. SETUP MENU
Press [MENU]. The MENU indicator will turn on.
Press the associated softkey to select a function.
Press the {EXIT} softkey to exit the Setup Menu.
FUNCTION DESCRIPTION
{CLEAR} Select Item to Clear.
{CLR CLIPS}
Delete all clips from 1000 to 1399, 2000 to 2399.
{CLR LISTS}
Delete all Playlists, (00 19),
{CLR MEMORY}
Clear all non-volatile memory including clips and Playlists.
{REC} Record function setup. See Item 4 in Table of Contents.
{DEFAULTS} {SET DEFAULTS}
Set Setup Menu parameters to factory programmed defaults.
P1 ACCESS Select {ENABLE} or {DISABLE} softkey to enable or disable control of
P1.
P2 ACCESS Select {ENABLE} or {DISABLE} softkey to enable to disable control of
P2.
TIME CODE
SUPPORT
Set for each playback channel.
Select TIMECODE {Supported} or {NOT Supported}.
For Profile XP, PDR select {NOT supported}.
For other video servers select {Supported}.
RECORD KEY
SETUP
Select {Load Only} or {Load and Cue}.
If {Load Only} is selected, every time REC key is pressed, the Master REC
clip will be loaded and parked at the top of the clip.
If {Load and Cue} is selected, the REC clip will be loaded, cued to current record time minus
input video delay and put into PLAY.
VIDEO
STANDARD
Select {PAL} or {NTSC}.