DNF Controls DMAT-O-22 - Manual (Page 10)

Page 6 of 21 DMAT-O-22 Sports Controller, Odetics Protocol
IV. START or STOP RECORD ON RECORDER
CHANNELS
A. Press [MENU].
B. Press {REC} softkey.
C. Select the channel or both on which you are going to record; {REC1},
{REC2}, {REC1 + 2}.
D. Press {CREATE}.
E. Enter the Record clip name, up to 8 characters. (For each channel if you
selected REC1+2).
F. Press [ENTER]. The new clip(s) gets created.
G. Press {START} softkey to start the recording.
H. Press [ESC] twice to exit menu the mode.
Now, when [REC] key is pressed, the clip that is currently being recorded gets
loaded onto the corresponding player channel.
To stop record at any time, go back to menu, select {REC}, and press
{STOP} softkey. Once the clip is stopped, the record cannot be restarted.
You have to create a new clip to start a new record.
V.MASTER CLIP ASSIGNMENT
To load the record clip onto the player; Press the [record] key.
To be able to load a different clip onto the player; the clip has to be pre-
assigned to the {CAM1}, {CAM2} keys.
A. Press P [1] or P [2] to select the playback channel.
B. Press [SHIFT] + {CAM1}, or [SHIFT] + {CAM2}.
The current assignments are shown in the left portion of the display. A list
of available clips in the video server is displayed on the right side of the
display.
C. Using the wheel, scroll through the list of CLIP IDs that are resident on the
Video Server.
D. Press softkey {CAM1} to assign the highlighted clip to CAM1.
Press softkey {CAM2} to assign the highlighted clip to CAM2.
{REC1} and {REC2} softkeys cannot be reassigned. They are assigned
the Recorder’s clips.
E. Press [ESC] to exit.