DNF Controls DMAT-O-22 - Manual (Page 11)

DMAT-O-22 Sports Controller, Odetics Protocol Page 7 of 21
VI. INPUT SELECTION
Select the Clip to view in PB mode on the current playback channel. Refer to
Section 4, MASTER RECORD CLIP ASSIGNMENT. This selection may be
changed at any time. This selection may be changed many times during a
production.
A. Press P [1] or P [2] to select the playback channel.
B. Press {REC1} to load Master Record Clip onto the selected channel.
Press {CAM1} to load Secondary Clip onto the selected channel.
C. Press {REC2} to load Master Record Clip onto the selected channel...
Press {CAM2} to load Secondary Clip onto the selected channel.
This input assignment will determine the clip number range used when
saving and recalling clips on this playback channel.
For example:
Assign CAM2 to playback channel 1.
Mark an In point and Out point, then press the Save Clip key.
The In and Out point will be saved in the next available clip in the
number range 2001 to 2399.
VII. GANG PLAYBACK CHANNELS
Press [GANG] key. P1 and P2 channels are ganged.
NOTE: Reference video must be connected in order to gang channels.