DNF Controls 4040CL-EVS-PBIO - Manual (Page 17)

4040CL-EVS-PBIO, 300 Clip Fast Access System, EVS DDRs Page 17 of 26
16. FUNCTION TABLE
Function Key Press Description
CUE TO OUT
POINT [CUE OUT] If OUT point is marked, cue to the OUT point.
FFWD
[FFWD] Press and HOLD to shuttle. Release key to stop. Set WIND
Speed in MENU.
GOTO
ENTERED TIME [SHIFT] + [RECUE] Search the VTR to the manually entered time.
Use the ST400 numeric keypad. Press [ENTER] or [RECUE].
GANG SETUP [GANG] Individually press the VTR keys to be included in the gang. The
LED above the key will turn on. Press the VTR key again to
remove from gang, the LED above the key will turn off.
Press [ESC] to exit.
Upon exiting, all members of the gang will have their VTR LEDs
turn on. The flashing LED shows which VTR is currently
selected.
JOG [JOG] Select JOG mode and enable Wheel.
LAST CUE [LAST] Step to the previous Cue Point Location.
NEXT CUE [NEXT] Step to the next Cue Point Location.
PREROLL [PREROLL] If an IN point is marked, preroll to the IN point using the
PREROLL VALUE in the Setup Menu.
LIVE ON
CURRENT
CHANNEL [REC] Places VTR into the Live mode.
Press [RECORD] OR [RECORD] + [PLAY].
REWIND
[RWD] Press and HOLD to shuttle. Release key to stop. Set WIND
Speed in MENU.
SHUTTLE [SHUTTLE] Select SHUTTLE mode and enable Wheel.
SLOMO
[SLOMO] Press [SLOMO] to slo-mo the VTR. Turn the Wheel
(or move the T-Bar, if available) to change the play speed.
Press [SLOMO] to STILL frame
OR press any transport key to exit SLOMO.
SLO-MO SPEED
PRESET [SHIFT] + [SLOMO] For WHEEL ONLY: Press [SHIFT] + [SLOMO] to preset the
slo-mo speed. Turn the Wheel to select desired speed.
Press [ESC] or any transport key to exit.