DNF Controls 4000CL-L Vs.3.0 - Manual (Page 15)

15 4000CL-L, Vs.3.0, 400 Clip Fast Access System, Louth Protocol
WIND MODE Press Softkey to select:
[HOLD] Fast wind is maintained only while key is depressed.
OR
[LATCH] Fast wind is initiated and maintained with momentary key press.
Press the [SPD] softkey to step through the list of available wind speeds and
select a speed.
SLOMO
ST300 display shows:
Press Softkey [SPEED] to select SLOMO speed ranges:
Press Softkey to select: 0 Æ +200 OR -100 Æ +200.
Press Softkey [BACK] to return to SLOMO MENU.
Press [ESC] to exit SETUP MENU.
OR
Turn the Wheel to select another item.
For Wheel only:
Press Softkey [PRSET] to select the SLOMO Preset Speed Mode.
Press Softkey [UPDATE]. When exiting SLOMO mode, the last used speed is
saved in the Preset Speed register.
Press Softkey [STATIC]. The Preset Speed register is NOT updated when
exiting SLOMO mode. It is only changed by [SHIFT] + [SLOMO] (PRESET
SLOMO).
ST300 SETUP
Press Softkey beneath ClearCues to clear all Cue Points to 00:00:00:00.
Press Softkey [YES] when asked “Are You Sure?”
Press Softkey beneath SetDefault to set ST300 to default settings.
Press Softkey [YES] when asked “Are You Sure?”
DISPLAY SOFTWARE
VERSION
The version number for the currently installed software is displayed.
ST300 SETUP
Clear Cues SetDefault
SLOMO with: WHEEL
Speed Prset