DNF Controls 4000CL-L Vs.3.0 - Manual (Page 14)

14 4000CL-L, Vs.3.0, 400 Clip Fast Access System, Louth Protocol
Reference . . .
13. SETUP MENU
Press [MENU]. The MENU indicator will turn on.
Turn the Wheel to select item to change.
Press [MENU] OR use the Softkeys to change the desired mode for that option.
Turn the Wheel at anytime to select another item.
Press [ESC] at anytime to exit SETUP MENU. The MENU indicator will turn off.
MENU MODES (Turning Wheel clockwise)
SET LOUTH
PORT
Allows user to select Louth Port for each VTR. Using the numeric key pad,
enter the LOUTH Port number for the video server channel to be controlled.
Press [ENTER] to select an INPUT channel.
OR
Press [ESC] to select an OUTPUT channel
RECORD MODE Press [MENU] to select the desired record mode: Lockout, Crash (Full).
EXTENDED IDs Toggle the softkey to turn Extended IDs ON.
(Support up to 32-character Clip IDs.)
OR
OFF (Support up to 8-character Clip IDs.)
CLIP SOM Press displayed softkey to toggle between “ZERO” and “NOT ZERO.”
Select ZERO if the clips that you are using start with 00:00:00:00.
Select NOT ZERO if the clips that you are using do not start with 00:00:00:00.
RECALL MODE Press Normal or Redirect (Redir).
When one and only one clip is learned into a Cue Point, the Clip will be
REDIRECTED to load on the currently selected VTR if REDIR is on.
If REDIR is off, the Clip will be loaded on the VTR it is LEARNED into.
VIDEO STANDARD Press displayed softkey to select PAL, NTSC (non drop frame), or DF (drop
frame).