DNF Controls 4000CL-L Vs.3.0 - Manual (Page 10)

10 4000CL-L, Vs.3.0, 400 Clip Fast Access System, Louth Protocol
c. RECORD A CLIP
NOTE: To record a clip, the video server must have enough memory to record the entire
clip. Video input must be connected to the Record Channel.
The ST300 Port selected for recording must be an Input Port [a “-“ (minus) number].
1) Set the desired record duration as described in Section 10.a., “SET THE
RECORD DURATION.”
2)
Create a new name as described above in Section 10.b., “CREATE A NEW
NAME.”
3) Press
[RECORD] to start recording.
4)
Press [STOP] to stop recording.