DNF Controls 4000CL-LPH - Manual (Page 6)

6 6 4000CL-LPH, 400 Clip Fast Access System, Louth Phillips Protocol
c. RECUE THE CURRENTLY LOADED CLIP
On the ST300
Press [RECUE] to recue the CLIP to its beginning.
The VIDEO SERVER will recue to the beginning of the clip, then go to STILL mode.
OR
Press [SHIFT] + [RECUE].
The display will show: “xx:xx:xx:xx”
(Where xx:xx:xx:xx = Last entered RECUE time.)
“Enter RECUE time”
Enter the desired time to search to using the ST300’s numeric keypad.
Press [ENTER] to search to the entered time.
OR
Press [ESC] to exit without searching.
d. VIEW THE CLIP ID OF THE CURRENTLY LOADED
CLIP
On the ST300
1)
Press and hold the [SHIFT] key.
2)
Press and release the [LOAD] key.
3)
The bottom line will show: “Loaded Clip: xxxxxxxx” where xxxxxxxx is the
CLIP ID.