DNF Controls 4000CL-LPH - Manual (Page 14)

1 1 4 4 4000CL-LPH, 400 Clip Fast Access System, Louth Phillips Protocol
11. FUNCTION TABLE
Function Key Press Description
GANG [SHIFT] + [VTR#1]
[SHIFT] + [VTR#2]
[SHIFT] + [VTR#3]
[SHIFT] + [VTR#4]
Select VTRs to gang together. The ganged VTR’s LEDs will turn
on. Press [SHIFT/ESC] to exit.
FFWD
[FFWD] Press and HOLD to shuttle. Release key to stop. Set WIND Speed
in MENU.
JOG
[JOG] Select JOG mode and enable the Wheel.
LAST CUE
[LAST CUE] Step to the previous Cue Point Location.
NEXT CUE [NEXT CUE] Step to the next Cue Point Location.
RECORD [REC] Places VTR in the Record mode selected by RECORD MODE in the
SETUP MENU.
(see MENU). One button record.
REWIND
[RWD] Press and HOLD to shuttle. Release key to stop. Set WIND Speed
in MENU.
SHUTTLE [SHUTTLE] Select SHUTTLE mode and enable the Wheel.
SLOMO
[SLOMO] Press SLOMO to slo-mo the VTR. Turn the wheel or move the T-
Bar to change the play speed. Press SLOMO to STILL frame OR
press any transport key to exit.
SLO-MO
SPEED
PRESET [SHIFT + SLOMO] For WHEEL ONLY - Press [SHIFT] + [SLOMO] to preset the slo-
mo speed. Turn wheel to select desired speed. Press [ESC] or any
transport key to exit.
STOP [STOP] Press once to STILL frame VTR.
Press again to put VTR into STOP mode.
TIME MODE
SELECT [TIME MODE] Press to toggle between Timecode (TC), VITC (VT) or Tape Timer
(TM) display modes.
RECUE [RECUE] Press to Recue the loaded clip.