DNF Controls 3040P-L_&_3040P-L-LT - Manual (Page 7)

3040P-L & 3040P-L-LT, Playlist Playout System, Louth Protocol Page 5 5 o o f f 2 2 4 4
IV. VIDEO SERVER SETUP
Select “Louth” Protocol on the video server.
Check the other options in the SETUP MENU prior to using the ST400 to set the
Louth Port Address. Confirm proper Video Standard mode and other User
settable modes.
NOTE: If the video server supports 32-character CLIP IDs and you would like to
add their ID’s to the list, Extended IDs have to be turned ON in the menu (see
SETUP MENU section). Otherwise, you will be limited to 8-character CLIP IDs.
Set the Play Preroll value for every channel. The default value is 5 frames. For
Sony MAV-70 use 72 frames. For Profile Video Disk Family, use 40 frames.
Set Disk Preroll Update to ON or OFF, depending on the server controlled. (See
Setup Menu.)
The default setting is OFF. For most servers, set it to ON.
For “Seachange” and “360 Systems” servers, set Disk Preroll Update to OFF.