Individual clip playout, Unload the list by pressing {unload} softkey, Press {edit – DNF Controls 3040P-L_&_3040P-L-LT User Manual
Page 14: Press {load} or [enter, Search to timecode, Press [recue] key, Enter time using numeric keypad, Press [enter] or [recue, Record a clip, Press [shift] + [rec
Page
1
1
2
2
o
o
f
f
2
2
4
4
3040P-L & 3040P-L-LT, Playlist Playout System, Louth Protocol
IX. INDIVIDUAL CLIP PLAYOUT
A. Unload the list by pressing {UNLOAD} softkey.
B. Press {EDIT}.
C. Turn the wheel to position the highlight bar at the desired clip.
OR
Type in a clip name using numeric keypad or PC keyboard.
D. Press {LOAD} or [ENTER].
The selected clip is loaded.
The display shows Elapsed Time (ET) of the clip when a single clip is loaded.
X. SEARCH TO TIMECODE
When the list is stopped or the individual clip is loaded, it is possible to position
the clip to the specific timecode.
A. Press [RECUE] key.
B. Enter time using numeric keypad.
C. Press [ENTER] or [RECUE].
The clip is reloaded with the entered timecode or its start timecode.
XI. RECORD A CLIP
A. Unload a list from a channel by pressing {UNLOAD} softkey.
B. Select a vtr that has been configured as an Input Louth Port (see Menu).
C. Press [SHIFT] + [REC].
The display prompts to enter the clip name or accept the default name.
D. Enter the name using numeric keypad or PC keyboard if desired.
E. Press [ENTER].
F. The display shows default record duration.
G. Modify the record duration if desired.
H. Press [ENTER]. The clip gets created.
I. Press [REC] to record the clip.