Playlist functions, Create a playlist, Press {load} to load a list – DNF Controls 3040P-L_&_3040P-L-LT User Manual
Page 11: Press {edit} to enter edit mode, Vii. playlist functions
3040P-L & 3040P-L-LT, Playlist Playout System, Louth Protocol Page
9
9
o
o
f
f
2
2
4
4
VII. PLAYLIST FUNCTIONS
A. Create A Playlist
1. Press {LOAD} to load a list.
Select an empty list. Press [ENTER] to get to the playlist screen.
2. Press {EDIT} to enter EDIT mode.
3. Turn the Wheel clockwise to scroll forward, or counterclockwise to scroll
backward, through the list of available CLIP IDs.
OR
Enter the described clip name using numeric or PC keyboard.
4. When the desired CLIP ID is highlighted, press {ADD} to add the clip to
the PLAYLIST.
OR
Press {AddFAST} to add the whole clip to the playlist.
5. If {ADD} was pressed in Step 4, the screen now displays “Enter Start
Time.”
Press [ENTER] to accept the default start time (00:00:00:00).
OR
Enter the start time with the numeric keypad and press [ENTER].
6. If {ADD} was pressed in step 4, the screen now displays “Enter
Duration.”
Enter the duration with the numeric keypad and press [ENTER].
NOTE: A duration of less than 3 seconds will NOT be accepted.
7. To add additional clips, in order, to the PLAYLIST, repeat steps 3
through 6.