DNF Controls 3040P-L_&_3040P-L-LT - Manual (Page 12)

Page 1 1 0 0 o o f f 2 2 4 4 3040P-L & 3040P-L-LT, Playlist Playout System, Louth Protocol
B. Insert Clips Into An Existing Playlist
1. Press {LOAD} and select a list to edit. Then press [ENTER].
2. Press {EDIT} to get to the PLAYLIST EDIT SCREEN.
3. Press {PLAYLIST} to move the highlight bar back to the PLAYLIST.
4. Turn the Wheel to move the highlight bar on the PLAYLIST to the clip
above which the new clip will be inserted.
5. Press {CLIPLIST}, turn the Wheel clockwise to scroll forward, or
counterclockwise to scroll backward, through the list of available CLIP
IDs. When the desired CLIP ID is displayed, press {INSERT}.
OR
Enter desired CLIP ID using numeric keypad or PC keyboard. Then,
press [ENTER].
6. The screen now displays “Enter Start Time.”
Press [ENTER] to accept the default start time (00:00:00:00).
OR
Enter the start time with the numeric keypad and press [ENTER].
7. The screen now displays “Enter Duration.”
Enter the duration with the numeric keypad and press [ENTER].
8. To insert additional clips to the PLAYLIST, repeat steps 4 through 7.
C. Play the Playlist
(Press [ESC] to move from the Edit Screen to the Playlist Main Screen.)
1. Press {TOP} to cue the PLAYLIST to the beginning.
2. Press [PLAY] to play the PLAYLIST.
3. The next clip will load into the preview position.
4. The list will play continuously until a break or the end of the list is
reached.
5. [JOG], [SHUTTLE], [SLO-MO], [RWD] and [FFWD] functions are not
available while viewing the PLAYLIST. The playlist must be stopped
first.
6. To move to the clips farther down in the PLAYLIST, press {SKIP}. ({SKIP} is
only enabled during PLAY mode.)