DNF Controls 2034CL-MAV - Manual (Page 7)

7 7 2034CL-MAV, 300 Clip Fast Access System, for Sony MAV-555
4. VIDEO SERVER SETUP
On the MAV Unit:
a.
The SONY MAV unit must have the following or higher software versions: V1.1
b.
Clips loaded from the front panel of the MAV will not be Learned or displayed on the
ST300 or the SHOTBOX.
c.
Crash and Lockout are the only RECORD modes supported.
5. LOAD AND LEARN EXISTING CLIPS
a.
Select VTR. You must be connected to the Player port to load existing clips.
b. Press
[CLIP LIST]. The CLIP LIST indicator will turn on.
The display prompts: “WHEEL-scroll files, ENTER- enter file ID”
c.
Turn the Wheel. The top line of the display will show “CLIP ID.”
The bottom line of the display will show “xxxxxxxxxxxxxxxxxxxx:”
Where “xxxxxxxxxxxxxxxxxxxx” is the 20 character CLIP ID. (CLIP IDs can contain
up to 24 characters. The ST300 is capable of displaying a maximum of 20 characters. If
a CLIP ID has more than 19 characters, the last character is a “Δ.)
d.
Turn the wheel to scroll through the list of available CLIPs.
OR
Type in an alphabetical ID using the “qwerty” keyboard on the SHOTBOX.
OR
Enter a numeric file ID using the numeric keypad on the ST300.
e. Press
[LOAD] to load the desired clip.
f.
Locate the clip to the desired IN time.
g. Press
[ESC] at anytime to exit CLIP LIST.