DNF Controls 2034CL-MAV - Manual (Page 5)

5 5 2034CL-MAV, 300 Clip Fast Access System, for Sony MAV-555
Getting Started . . .
2. SYSTEM DESCRIPTION
The 300 Clip Instant Access System consists of the ST300-SSM VTR Controller and Shotlist
Software. The Video Server must support SONY DP Protocol.
The ST300 controls up to 4 video channels individually or ganged.
SHOTLIST provides instant access to existing video clips stored on SONY-MAV.
The SHOTLIST contains up to 300 CLIP IDs, stored in non-volatile memory in the ST300.
Any clip in the SHOTLIST can be quickly loaded by simply entering the associated 3-digit
number of its location, then pressing [LOAD]. Press [PLAY] to play the clip. Press [RECUE] to
recue to the beginning of the clip or to the “recalled” time if defined.
DEFINITIONS
‰ Throughout this document, the MAV-555 will be referred to as “Video Server.”
‰ The ST300-S/SM is referred to as the ST300.
‰ The ST420 is referred to as the SHOTBOX.
‰ Words surrounded by brackets, for example, [ENTER], are keys on the ST300 or the
SHOTBOX. [XXX] + [XXX] means hold the two keys down simultaneously.
‰ “Softkeys” are the row of keys directly below the display that perform multiple functions in
MENU and other modes.