DNF Controls 2034CL-MAV - Manual (Page 11)

1 1 1 1 2034CL-MAV, 300 Clip Fast Access System, for Sony MAV-555
12. TRIMMING CLIPS
a.
LOAD a clip that you want to trim.
b.
Mark IN and OUT points as described above.
c. Press
[SHIFT] + [CLIP LIST]. The display prompts “Enter new file name.”
d.
Enter new file name (up to 8 characters) using the numeric keypad.
e. Press
[ENTER] or [LOAD] to save the new CLIP ID.
OR
Press [ESC] to exit without saving.
If the saving is successful, the new clip is created. The beginning of the clip is the marked IN
point, the end of the clip is the OUT point. You can load the new clip using the CLIP LIST
function. Upon saving the new clip, marked IN and OUT points are cleared.
NOTE: Do not create trimmed clips with a duration of less than 18 frames.
13. LOOPING A CLIP
a.
Press [LOOP ENABLE]. The indicator turns on.
b.
The clip is now in the loop mode. Pressing [PLAY], [SLOMO], [FFWD], etc. will
cause the clip to play to the end and wrap around to the beginning.
c.
To return to normal mode, press [LOOP ENABLE]. The indicator will turn off