DNF Controls 2034CL-MAV - Manual (Page 15)

1 1 5 5 2034CL-MAV, 300 Clip Fast Access System, for Sony MAV-555
Reference . . .
18. SETUP MENU
Press [MENU]. The MENU indicator will turn on.
Turn the Wheel to select item to change.
Press [MENU] OR use the Softkeys to change the desired mode for that option.
Turn the Wheel at anytime to select another item.
Press [ESC] at anytime to exit SETUP MENU. The MENU indicator will turn off.
MENU MODES (Turning Wheel Clockwise)
RECORD Press [MENU] to select the desired record mode: Crash (Full) or Lockout.
WIND MODE Press [HOLD]. (Fast wind is maintained only while key is depressed).
OR
[LATCH]. (Fast wind is initiated and maintained with momentary key press).
Select fast wind speed (3.9 to 23.7) by pressing Softkey below SPD.
SLOMO
ST300 display shows:
(Non T-Bar version)
ST300 display shows:
(T-Bar versions)
Press Softkey [TBAR] (or [WHEEL]) to toggle between them.
NOTE: The T-BAR has a fixed speed range of 0 Æ +200 with a detent at +100 %
play speed.
For Wheel only:
Press Softkey [SPDRANGE] to select SLOMO speed ranges:
Press Softkey to select: 0 Æ +200 OR -100 Æ +200.
Press Softkey [BACK] to return to SLOMO MENU.
Press [ESC] to exit OR turn the Wheel to select another item.
For Wheel only:
Press Softkey [PRSET] to select the SLOMO Preset Speed Mode.
Press Softkey [UPDATE] when exiting SLOMO mode. The last used speed is
saved in the Preset Speed register.
Press Softkey [STATIC].
The Preset Speed register is NOT updated when exiting SLOMO mode.
It is only changed by [SHIFT] + [SLOMO] (PRESET SLOMO).
SLOMO with: WHEEL
SpdRange Preset
SLOMO with: TBAR
Wheel Speed Preset