DH Satellite 60 Heavy Duty Polar/Powered Dec - Manual (Page 3)

BOLT BAG: FOR THE 60” POLAR MOUNT
C14F
C HAP A RRAL
FEED ASS E M BLY
1- Set of 4 Struts
1- C
o llar (C, Ku)
8- 1 ½” x 1/4” Bolts
8- ¼” Lock Washers & Nuts
Ku4FL: 3PC
ADD TO C14F
3- Section to 3pc collar
3 8-32 x 1” Bolts
3PC COLLAR TO HORSESHOE
3 8-32 x ¾” Bolts
3- #8 Fender Washers
3 8-32 Nuts
RING TO DISH
12 TAB/ 6” RING
12- 1/2” x 1 ½” Bolts
1 2- 1/2” Nuts
12- 1/2” Lock Washers
24-
1/2” Rubber Washers
12- 1/2” Stee l Was her s
RING TO DISH
16 TAB/ 6” RING
16- ½” x 1 ½” Bolts
16- ½” Flat Washers
32- ½” Rubber Washers
16- ½” Lock Washers
16- ½” Nuts
RING TO DISH
16 BLOCK/ 4” RING
16- ½” x 3” Bolts
16- ½” Flat Washers
32- ½” Rubber Washers
16- ½” Lock Washers
16- ½” Nuts
TURNBUCKLE
1- Turnbuckle
2- ½” x 1 ½” Bolts
2- ½” Lock Washers
2- ½” Nuts
LOCKING BAR
2- ½” x 1 ½” Bolts
2- ½” Nuts
2- ½” Lock Washers
NOTE: SECTIONAL ANTENNAS INCLUDE ADDITIONAL
HARWARE, SEE TABLES BELOW
Template Rib Hardware: Sectional
Antenna Size ¼” x ¾” Bolts ¼” Lock Washers ¼” Nuts
3.0M 44 44 44
3.7M 52 52 52
3.8M 56 56 56
4.2M 120 120 120
4.5M 136 136 136
Splice Straps: Sectional
Antenna Size Splice Straps ¼” x ¾” Bolts ¼” Lock Washers ¼” Nuts
3.0M 4 8 8 8
3.7M 4 8 8 8
3.8M 4 8 8 8
4.2M 8 16 16 16
4.5M 8 16 16 16
SADDLE TO BOOM
2- ¾” x 7” Bolts
2- ¾” Nuts
2- ¾” Lock Washers
Page 3
BACK BRACES
8- Back Braces
8- Brace Clips
8- Bent Tabs
24- ½” Nuts
8- ½” Lock Washers
8- 3/8” x 1 ½” Bolts
8- 3/8” Nuts
8- 3/8” Lock Washers
16- ¼” x ¾” Bolts
16- ¼” Nuts
16- ¼” Lock Washers
NOTE:
Stainless steel or DURA-CON® hardware provided.
*DURA-CON® is a corrosion resistant coating.
DURA-CON®: Problem of thread-galling is eliminated.