DH Satellite 60 Horizon to Horizon/Powered Dec - Manual

Installation Instructions for the
Horizon‐to‐Horizon Mount
Congratulations, you have now purchased the finest Horizon‐to‐Horizon Mount
available. This unit will not only track the Geosynchronous Arc, but when equipped with the
Power Declination option, it will work very well for satellites that are in inclined orbit or
elliptical orbit. Assemble using these instructions. If you have any questions please call (608)
326‐8406 for help.
The Horizon‐to‐Horizon Mount is designed to go with the 3.0m, 3.7m, 3.8m, 4.2m, 4.5m
and the 5.0m antenna . As all are identical in theory, we will cover the basic installation first and
address each individually as the installation requires.
PLEASE READ COMPLETE INSTRUCTIONS BEFORE BEGINNING INSTALLATION!
PARTS LIST
1‐ DH Antenna
1‐ Horizon‐to‐Horizon Mount
60” Back Ring
5 ½” Base Can
4‐ Back Braces for 3.3m‐ See Note*
(8 Back Braces for 3.7m‐5m)
(No Back Braces for 3.0m)
4‐ Feed Struts
1‐ 36V Motor
1‐ Feed Collar
1‐ Bolt Bag to include all Hardware
listed on page 14.
*3.3m Discontinued After 1‐1‐2013
*3.9m Discontinued After 1‐1‐2013
***Optional: Power Declination
Instructions are on page 15.
DH Satellite
PO Box 239
Prairie du Chien, WI 53821
Phone: (608) 326‐8406
Fax: (608) 326‐4233
Sectional antennas must be handled with care not to
twist or distort sections while handling for installation.
04/02/2015