DH Satellite 26 Polar Series - Manual

Thank you for buying DH products. The DH mount is one of the easiest to
assemble. It is one of the sturdiest and most stable mounts available on the
market today. Please follow these instructions carefully to insure
optimum performance of your system.
"B" MOUNT
INSTALLATION INSTRUCTIONS
PARTS LIST:
1 DH Spun antenna
1 26" Round Frame
1 Boom
1 3" I.D. Base Can
2 26 1/2" x 1 1/2" x 1 1/2" Angles
1 Locking Bar 3/4" x 3/4” x 16”
1 Set 22" Focal length struts
BOLT BAG FOR “26/B” MOUNT:
1
1/2” X 4” BOLTS
4 1/2” X 2” BOLTS
1 1/2” X 1 ½” BOLT
3 3/8” X 1” BOLT
1
5/8” X 12” EYE BOLT
2 5/8” NUTS
14 1/2” NUTS
6 3/8” NUTS
3 3/8” LOCK WASHERS & NUTS
6 1/4" NUTS
12 3/8" FLAT WASHERS
12 1/2" RUBBER WASHERS
2
1/2" BEARINGS
6 1/2" LOCK WASHERS
Locking bar is used in place of an actuator to fix the antenna to one satellite.
TECHNICAL ASSISTANCE:
M-F 1/608-326-8406 EXT 105
[email protected]
WWW.DHSATELLITE.COM
600 N MARQUETTE RD
PRAIRIE DU CHIEN WI 53821
U.S.A
.
NOTE:
Stainless steel or DURA-CON® hardware provided.
*DURA-CON® is a corrosion resistant coating.
DURA-CON®: Problem of thread-galling is eliminated.