DH Satellite 60 Heavy Duty Polar/Powered Dec - Manual (Page 19)

POLAR MOUNT WITH POWER DECLINATION
Look carefully at the drawing above. This shows where the declination actuator is placed on
the mount. The polar mount must be ordered from the factory with this option as it is not a
retrofit kit. The end of the actuator bolts to the plate under the top of the 60” ring with a 1/2” x 2
1/2” bolt. The actuator clamp is attached to the actuator as per the manufactures
recommendation. Then using the 3/4” x 3” bolt, slide it through the declination bracket and
through the clamp and fasten it using the 3/4” nut.
Page 15