DFI HM920-HM86 - Manual (Page 50)

www.dfi .com Chapter 4 BIOS Setup
50
Chapter 4
Save & Exit
Save Changes and Reset
To save the changes, select this field and then press . A dialog box will appear.
Select Yes to reset the system after saving all changes made .
Discard Changes and Reset
To discard the changes, select this field and then press . A dialog box will ap-
pear. Select Yes to reset the system setup without saving any changes.
Restore Defaults
To restore and load the optimized default values, select this field and then press
ter>. A dialog box will appear. Select Yes to restore the default values of all the setup
options.
Save as User Defaults
To save changes done so far as user default, select this field and then press .
A dialog box will appear. Select Yes to save values as user default.
Restore User Defaults
To restore user default to all the setup options, select this field and then press
ter>. A dialog box will appear. Select Yes to restore user default.
Reset the system after
saving the changes.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Chipset Advanced Main Boot Security Save & Exit
Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility, AFUDOS.EXE.
Please contact technical support or your sales representative for the files.
To execute the utility, type:
A:> AFUDOS BIOS_File_Name /b /p /n
then press .
C:\AFU\AFUDOS>afudos fi lename /B /P /N
+--------------------------------------------------------------------------------------------------------+
AMI Firmware Update Utility(APTIO) v2.25
Copyright (C)2008 American Megatrends Inc. All Rights Reserved.
+--------------------------------------------------------------------------------------------------------+
|
| |
|
Reading fi le ..............................
Erasing fl ash .............................
Writing fl ash .............................
Verifying fl ash ..........................
Erasing BootBlock ....................
Writing BootBlock ....................
Verifying BootBlock .................
C:\AFU\AFUDOS>
done
done
done
done
done
done
done
After finishing BIOS update, please turn off the AC power. Wait about 10 seconds and then
turn on the AC power again.


Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save and Reset
Exit