Chapter 4 chipset – DFI HM920-HM86 User Manual

Page 42

www.dfi .com

Chapter 4 BIOS Setup

Chapter 4

Chipset

This section configures the relevant functions of chipset.



PCH-IO Confi guration



System Agent (SA) Confi guration



NB PCIe Bifurcation Confi guration

Save & Exit

Advanced

Boot

Security

Main

Chipset

PCH Parameters

PCH-IO Configuration

This section configures PCH parameters.

i217 LAN Controller

Enable or disable onboard NIC.

Wake on LAN

Set this field to enable to wake up the system via the onboard LAN or via a LAN card

that supports the remote wake up function.

Restore AC Power Loss

Select AC power state when the power is re-applied after power failure.
Power-off

When power returns after an AC power failure, the system’s power is off. You must

press the Power button to power-on the system.

Power-on

When power returns after an AC power failure, the system will automatically power-on.

Last State

When power returns after an AC power failure, the system will return to the state

where you left off before power failure occurs. If the system’s power is off when AC

power failure occurs, it will remain off when power returns. If the system’s power is

on when AC power failure occurs, the system will power-on when power returns.

PCI Express Confi guration
settings.

Intel PCH RC Version
Intel PCH SKU Name
Intel PCH Rev ID



PCI Express Confi guration



USB Confi guration



PCH Azalia Confi guration

i217 LAN Controller

Wake on LAN
Restore AC Power Loss

1.4.0.0
HM86
04/C1

[Enabled]
[Disabled]
[Power On]

Chipset





Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:

Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save and Reset
Exit





Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:

Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save and Reset
Exit

This manual is related to the following products:

HM920-QM87