DFI HM920-HM86 - Manual (Page 36)

www.dfi .com Chapter 4 BIOS Setup
36
Chapter 4
SATA Configuration
This section is used to configure the settings of SATA device.
Enable or disable SATA
Device.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
SATA Controller(s)
SATA Mode Selection
Serial ATA Port 0
Software Preserve
Serial ATA Port 1
Software Preserve
Serial ATA Port 2
Software Preserve
Port 2
Serial ATA Port 3
Software Preserve
Serial ATA Port 4
Software Preserve
Serial ATA Port 5
Software Preserve
Advanced
SATA Controller(s)
This field is used to enable or disable the Serial ATA device.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
IDE Mode
This option configures the Serial ATA drives as Parallel ATA storage devices.
AHCI Mode
This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Inter-
face).
RAID Mode
This option allows the Serial ATA devices to use RAID 0/1/5/10/Recovery (Redundant
Array of Independent Disks).
Port 2
This field is used to enable or disable the function of the onboard IDE device, and the
default value is disable. When you use the onboard IDE device, you must enable the
port 2.
[Enabled]
[IDE]
Empty
Unknown
Empty
Unknown
Empty
Unknown
[Disabled]
Empty
Unknown
Empty
Unknown
When AHCI is selected in the SATA Mode Selection, it will display the following information:
When RAID is selected in the SATA Mode Selection, it will display the following information:
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Advanced
SATA Controller(s)
SATA Mode Selection
Serial ATA Port 0
Software Preserve
Port 0
SATA Device Type
Serial ATA Port 1
Software Preserve
Port 1
SATA Device Type
Serial ATA Port 2
Software Preserve
Port 2
SATA Device Type
Serial ATA Port 3
Software Preserve
Port 3
SATA Device Type
Serial ATA Port 4
Software Preserve
Port 4
SATA Device Type
Serial ATA Port 5
Software Preserve
Port 5
SATA Device Type
[Enabled]
[AHCI]
Empty
Unknown
[Enabled]
[Hard Disk Drive]
Empty
Unknown
[Enabled]
[Hard Disk Driver]
Empty
Unknown
[Disabled]
[Hard Disk Drive]
Empty
Unknown
[Enabled]
[Hard Disk Driver]
Empty
Unknown
[Enabled]
[Hard Disk Driver]
Empty
Unknown
[Enabled]
[Hard Disk Driver]
Determines how SATA
controller(s) operate. 

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Advanced
SATA Controller(s)
SATA Mode Selection
Smart Response Technology
Serial ATA Port 0
Software Preserve
Port 0
SATA Device Type
Serial ATA Port 1
Software Preserve
Port 1
SATA Device Type
Serial ATA Port 2
Software Preserve
Port 2
SATA Device Type
Serial ATA Port 3
Software Preserve
Port 3
SATA Device Type
Serial ATA Port 4
Software Preserve
Port 4
SATA Device Type
Serial ATA Port 5
Software Preserve
Port 5
SATA Device Type
[Enabled]
[RAID]
[Enabled]
Empty
Unknown
[Enabled]
[Hard Disk Drive]
Empty
Unknown
[Enabled]
[Hard Disk Driver]
Empty
Unknown
[Disabled]
[Hard Disk Drive]
Empty
Unknown
[Enabled]
[Hard Disk Driver]
Empty
Unknown
[Enabled]
[Hard Disk Driver]
Empty
Unknown
[Enabled]
[Hard Disk Driver]
Determines how SATA
controller(s) operate. 



Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save and Reset
Exit


Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save and Reset
Exit


Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save and Reset
Exit