DFI KS230-CD Manual - Manual (Page 9)

www.dfi .com
9
Chapter 1 Introduction
Environment • Temperature
- Operating: 0 o C ~ 40 o C (with SSD/HDD)
- Storage: -30 o C ~ 80 o C
• Relative Humidity
- 85% RH at 40 o C
Vibration • Sweep frequency: 1G 5~500Hz
• Amplitude: 0.75mm
• IEC 68-2-64 compliant
Shock • Operating: 3G peak acceleration (11 msec. duration)
• Non-operating: 10G peak acceleration (11 msec. duration)
• IEC 68-2-27 compliant
Construction • Aluminum front bezel
• Rear panel: sheet metal
Mounting • Wall mount (VESA 75x75)* (optional)
• Panel mount (Mounting clamp)* (optional)
Dimensions • 230.40mm x 142.32mm x 59.50mm (W x H x D)
Weight • TBD
OS Support • Windows 7 pro (32-bit), WES 7 (32-bit)
• Linux (Project based upon request only, with 3 months lead time)
Certifi cation • CE
• FCC Class A
• RoHS
Processor • Intel ® Atom TM N2800, 1.86GHz, 2x 512K L2, 6.5W TDP, dual-core
Chipset • Intel ® NM10 Express chipset
Memory • One 204-pin DDR3 SODIMM socket
• Supports DDR3 1066MHz
• Supports single channel memory interface
• Supports up to 4GB system memory
LCD and Touch
Screen
• 7” (800x480) WVGA TFT touch screen LCD
• 4-Wire Resistive touch screen
• 50,000 MTBF LED backlight
• 400 NITS
Storage • 1 2.5" SATA drive bay
- SATA 2.0 port with data transfer rate up to 3Gb/s
• 1 CompactFlash socket* (optional)
Graphics • Intel ® GMA 3650
• Display port: VGA
• VGA display resolution up to 1920x1200
LAN • 2 Intel ® 82574 Gigabit Ethernet Controllers
• Integrated 10/100/1000 transceiver
• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Audio • Realtek ALC886 2-channel High Defi nition Audio
I/O Ports • Bottom
- 1 DB-9 RS232/422/485 serial port (Up to 6 DB-9 serial ports* (optional))
- 2 Type A USB 2.0/1.1 ports
- 1 DB-15 VGA port
- 2 RJ45 LAN ports
- 1 Line-out jack
- 1 Mic-in jack
- 1 12V DC-in jack
- 1 power switch
Expansions • 1 Mini PCIe slot
- Supports PCIe (PCIe and USB signals) or mSATA module
- Supports half size card
Specifications
KS232-CD
Chapter 1
Note:
*Optional and is not supported in standard model. Please contact your sales represen-
tative for more information.