DFI KS230-CD Manual - Manual (Page 31)

www.dfi .com
31
Chapter 4 Ports and Connectors
Chapter 4
DC-in
This jack provides maximum of 60W power and is considered a low power solution. Connect
a DC power cord to this jack. Use a power adapter with 12V DC output voltage. Using a volt-
age higher than the recommended one may fail to boot the system or cause damage to the
system board.
DC-in
The 8-bit Digital I/O connector provides powering-on function to external devices that are con-
nected to the connector.
8 1
1 4
+12V Ground 5VSB +5V
Digital I/O power
Digital I/O
I/O Connectors
Digital I/O Connector
Digital I/O Power Connector
Digital I/O Connector
Pins Function
1 DIO0
2 DIO1
3 DIO2
4 DIO3
5
DIO4
6
DIO5
7 DIO6
8 DIO7