DFI KS230-CD Manual - Manual (Page 16)

www.dfi .com
16
Chapter 3 Installing the Devices
Chapter 3
Installing the 2.5” SATA Drive
1. First, remove the mounting screws on the side of the system unit and then put them in a
safe place for later use.
Mounting Screw
Mounting Screw
Mounting Screw
3. Take the HDD bracket out of the system unit to insert the SATA drive into the bracket.
2. Then, Remove the mounting screw on the HDD bracket and put it in a safe place for later
use.
4. Insert the SATA drive into the HDD bracket and secure it in place with the provided mount-
ing screws.
HDD bracket
HDD bracket
HDD bracket
SATA drive
HDD bracket