DFI KS230-CD Manual - Manual (Page 19)

www.dfi .com
19
Chapter 3 Installing the Devices
Chapter 3
4. With the label facing up, insert the CompactFlash card until it is completely seated in the
socket.
CompactFlash socket
CompactFlash card
Installing the Mini PCIe Card
1. After removing the system cover, you also need to remove 6 mounting screws on the each
side of the system chassis, mounting screws on the COM port and on the VGA port, and
a spacer and a nut used to secure the DC-in jack. Then, put them in a safe place for later
use.
Mounting screw
Mounting screw
Mounting screw
A spacer and a nut