DFI KS230-CD Manual - Manual (Page 14)

www.dfi .com
14
Chapter 3 Installing the Devices
Chapter 3
Chapter 3 - Installing the Devices
1. Make sure the system and all other peripheral devices connected to it have been powered-
off.
2. Disconnect all power cords and cables.
3. The 8 mounting screws on the sides of the system are used to secure the cover to the
chassis. Remove these screws and then put them in a safe place for later use.
Removing the Chassis Cover
4. After removing the mounting screws, lift the cover up.
5. The SODIMM socket is readily accessible after removing the chassis cover.
Lift the Cover Upward
Mounting Screw Mounting Screw
SODIMM socket