Delta Dore 620 RADIO DRIVER Installation - Manual (Page 3)

Mounting / Placement of the RADIO DRIVER
For easier use, the RADIO DRIVER can be installed:
- mounted on the wall with screws and pegs at
an approximate height of 1.5 m,
- on a support placed on an item of furniture or
a shelf.
Separate the unit
from its base
by unlocking
the casing.
Starting up
When you turn the unit on for the first time, you will
need to set the time.
Remove the battery cover.
- 5 -
Screw-mounting
Mount the base with screws and
pegs suited to the support or on
a flush-mounted box, then close
and lock the unit.
Fitting to the base
Position the unit on its base and lock it.
Po s ition the thermo s t a t
on it s bas e
Lock the thermo s t a t 1 2
- 4 -