Dataprobe iBoot-Hub Operation Manual - Manual (Page 15)

140926E iBoot-HUB Page 15
9. Firmware Upgrades
The iBoot (ver 3.1 and above) can be field upgraded. Find the latest version, or special purpose versions at
dataprobe.com/support_iboot.html
Upgrading the firmware requires the program
Firmwareloader.exe and an upgrade (.upg) file.
Both these files need to be in the same
subdirectory.
1. Run the Firmwareloader.exe.
2. Enter the IP address of the iBoot to be
upgraded.
3. Enter the Administrator Password of the iBoot
to be upgraded.
4. Select one .upg file from the list.
5. Click on Upload.