Daktronics All Sport 3000 Series - Manual (Page 36)

Segment Timer 3-5
Auto Stop
LCD Screen Action
EACH SEG Y/N*
CLEAR=n*ENTER=y
* = current setting
Last seg *y/n
CLEAR=n*ENTER=y
* = current setting
This setting determines the operation of the console
when each segment is completed.
Press <ENTER> to set the console to stop after each
segment is completed, and wait for the <START>
key to proceed with the next segment.
Press <CLEAR> to set the console to automatically
begin the next segment when each segment is
completed.
If the setting of Auto Stop At Each Seg is No, the
console will prompt for the Auto Stop At Last Seg
setting.
Press <ENTER> to set the console to stop when the
Last Segment has been completed.
Press <CLEAR> to set the console to start over at
the First Segment when the Last Segment is
completed
Warning Time
LCD Screen Action
Warning time
00:00
00:00 = default
Enter the Warning Time in minutes and seconds and
press <ENTER>.
Enter 00:00 for no Warning Time.
When Warning Time is reached, the segment number
flashes until the main clock reaches zero.
Current Segment
Press <CURRENT SEGMENT +1> to increment the segment number.
Reset Current Segment
Press <RESET CURRENT SEGMENT> to reset the segment time to the value
specified by the current segment. The segment number will remain at the current
value.