Daktronics All Sport 3000 Series - Manual (Page 29)

2-16 Basic Operation
Lamp Test
Press <ALT> and <LAMP TEST> to display the Lamp Test prompt.
LCD Display Action
Lamp test mode
Enter to accept
Press <ENTER>to start the basic Lamp Test mode
Press any other key to return to the current sport.
Lamp test mode
Any key to exit
This prompt will display while in the lamp test.
Press any key to return to the current sport.
1/10 Second
Notes: this key functions only when the clock is stopped.
The <1/10 SEC> key toggles the scoreboard between displaying full seconds or
tenths of a second in the main scoreboard clock.
Press <ALT> and <1/10 SEC> to change the main clock between full seconds and
tenths of a second.
2.8 Remote Start/Stop Controls
Main Clock Control
The remote start/stop control box plugs into J4 on the back of the All Sport 3000
console. This unit has a rocker switch for Start/Stop and a momentary button for
Horn. The Start/Stop switch starts and stops the main timer. The Horn button
sounds the horn as long as the button is pressed.
Shot Clock Control
The remote shot clock control box plugs into J7 on the back of the All Sport 3000
console. This unit has a rocker switch for Start/Stop and a momentary button for
Reset. When the Reset button is pressed, the shot clock timer is changed to the reset
value and stops the timer from decrementing. The shot clock timer restarts when the
Reset button is released. The shot clock timer will not run unless the main clock is
running.
Play Clock Control
The remote play clock control box plugs into J7 on the back of the All Sport 3000
console. This unit has a rocker switch for Start/Stop and a momentary button for
Reset. When the Reset button is pressed, the play clock timer is changed to the reset
value and stops the timer from decrementing. The play clock timer restarts when the
Reset button is released. The Start/Stop switch always starts and stops the play
clock.