Daktronics AF-3165-34-RGB - Manual (Page 40)

RS422 Interconnection
Primary – RS422 OUT
(A31-TB3)
Field
Cabling
Secondary – RS422
IN
(A31-TB2)
Pin 1 (GND) Shield Pin 6 (GND)
Pin 2 (D2OUT-N) Red Pin 5 (D1IN-N)
Pin 3 (D2OUT-P) Black Pin 4 (D1IN-P)
Pin 4 (D2IN-N) Green Pin 3 (D1OUT-N)
Pin 5 (D2IN-P) White Pin 2 (D1OUT-P)
Pin 6 (Shield) Pin 1 (Shield)
Fiber Interconnection
Reference Drawings:
System Riser Diagram Fiber ....................................... Drawing A-174344
A fiber cable may be used to connect two or more displays in the fiber
interconnection method. Connect the fiber cable to the fiber cards of the display as
described in Drawing A-174344 and on the following table.
Face A Data Out
(A34)
Field
Cabling
Face B Data In
(A34)
J2 (TX1) Color varies J5 (RX2)
J3 (RX1) Color varies J4 (TX2)
3.9 Optional Temperature Sensor
If an optional temperature sensor will be used with your display, refer to Appendix
C for mounting and signal connections.
Electrical Installation 3-20