Daktronics AF-3165-34-RGB - Manual (Page 38)

Venus
®
1500 Radio Client
Reference Drawings:
System Riser Diagram;
QC Outdoor Radio, Gen 2 .................................... Drawing A-185359
Schematic, Signal Wiring Internal, w/QC PCB ............ Drawing B-177662
A radio-controlled display requires a server radio connected to the control computer,
and a client radio at the display. The radios must be within line-of-sight of each
other. The client radio enclosure includes 25 feet of weather resistant pre-terminated
cable. One end of the cable is pre-terminated to TB1 inside the radio enclosure, and a
quick connect plug is terminated at the other end of the cable. The cable can be
terminated to the display at J33 with the quick connect plug as shown in
Figure 31 .
Refer to Figure 30 and Drawing A-185359 for the system layout. Additional
drawings for the Server connections are in the Venus 1500 Radio manual
(ED13932).
Figure 30: Radio Display Layout
Figure 31: Client Radio Display Connection
Electrical Installation 3-18