Daktronics AF-3065-34-RGB - Manual (Page 13)

Mechanical Installation 2-1
Section 2: Mechanical Installation
L
Notes: Daktronics does not guarantee the warranty in situations where the display is not constantly
in a stable environment.
Daktronics engineering staff must approve any changes that may affect the weather-tightness of the
display. If any modifications are made, detailed drawings of the changes must be submitted to
Daktronics for evaluation and approval, or the warranty may be void.
Daktronics is not responsible for installations or the structural integrity of support structures done by
others. It is the customer’s responsibility to ensure the structure and any additional hardware have
been approved by a qualified structural engineer.
2.1 Mechanical Installation Overview
Because every installation site is unique, there is no single Daktronics-approved procedure for
mounting the Galaxy displays. The information contained in this section is general information only
and may or may not be appropriate for your particular installation.
A qualified individual must make all decisions regarding the mounting of this display.
Read both the mechanical and electrical installation sections of this manual before beginning
any installation procedures.
2.2 Support Structure Design
Support structure design depends on the mounting methods, display size and weight. The structure
design is critical and should be done only by a qualified individual. Display height and wind loading
are also critical factors. It is the customer’s responsibility to ensure that the structure and mounting
hardware are adequate. Daktronics is not responsible for the installations or the structural integrity of
support structures done by others.
It is the installer’s responsibility to ensure the mounting structure and hardware are capable of
supporting the display, and will agree with local codes.
Before beginning the installation process, verify the following.
· The mounting structure will provide a straight and square mounting frame for the display.
· The mounting structure is capable of supporting the display and will not yield at any
unsupported points after mounting.
· Clearance: 3
² of unobstructed space is available below the display for filter removal from the
display. 1-¼
² of unobstructed space is available above the top of the display.
Correct any deficiencies before installation.